The Air Slide is designed to convey bulk powders from silos or storage compartments into a pneumatic conveying processing system. These provide a convenient and easily controllable method of conveying that can incorporate bends and multiple discharge points if necessary.
Standard AS300 Air-Slide Section
The Air Slide System consists of a rectangular chamber separated by a permeable cloth. The chamber is inclined at a very slight angle (as low as 1.5°). Compressed air is injected into the lower chamber which then permeates through the media and "fluidises" the product. The product then behaves like a fluid and "flows" down the length of the chamber while the excess air is vented to a dust collector.
Our Air Slide sections are available in a range of standard opening sizes with lengths of up to 6 metres, but it can be manufactured to suit individual customer requirements. It can also be joined directly or incorporated to fit any of our Air Slide accessories shown below.
Our Air Slide Models can easily be incorporated to any of our standard Air Slide accessories shown below.
Air-Slide Turning Pot (90° Model Shown) can be
manufactured to almost any angle required.
Air-Slide Pneumatic Slide Gate
Single Cartridge Reverse Pulse Dust Collector
Air-Slide Pneumatic Diverter Gate
AS200 Air-Slide complete with lifting lugs, inspection ports,
discharge adapter, side view ports and product inlet.
We take pride in supplying high quality products and services to our clients in Australia and around the globe. We tailor our services to fit your every need and concern. Contact us to learn more about the pneumatic products, systems and services we offer such us:
Regenerative blowers are applied to situations where a large volume of air at high pressure is needed.
They are used in scenarios involving flammable gases or processes with hazardous or heavy-duty elements.
Read on to find out more
Pipe and Tube Compression Couplings
Industrial Dust Collectors Systems
Dust Collectors Filters, Cartridges and Bags
